What should I do if the suction force of the magnetic lock is insufficient?

Time：

21-12-22

Author：

Zhengshi Hardware

If the inspection is not the above problem, then you can consider the problem of the wire you choose. You can use a multimeter to measure the voltage of the magnetic lock power input (the magnetic lock is normally 12V). The farther the magnetic lock is from the power source, the greater the voltage drop that will be generated. Insufficient voltage will also cause the magnetic lock to have insufficient suction, or no suction at all.

The automatic door magnetic lock has a little suction or insufficient suction. The reasons and solutions are as follows:

1. There is no standard installation of the magnetic lock during installation.

2. If the inspection is not the above problem, then you can consider the problem of the wire you choose. You can use a multimeter to measure the voltage of the magnetic lock power input (the magnetic lock is normally 12V). The farther the magnetic lock is from the power source, the greater the voltage drop that will be generated. Insufficient voltage will also cause the magnetic lock to have insufficient suction, or no suction at all.

3. The traction plate of the magnetic lock is installed too tightly, so that the magnetic lock body and the traction plate are not all surface-to-surface attraction, but a certain part of the attraction. This will inevitably lead to insufficient suction.

The reason why the automatic door magnetic lock has a little suction or insufficient suction is mainly the above-mentioned. We all need to operate the automatic door magnetic lock in the correct way. These are also what we all need to understand. We all need to address these issues in a timely manner.

How to identify stainless steel door locks and zinc alloy door locks?

What is the difference between a handle door lock and a ball lock

Want to learn more about the product?

Leave your contact information to get the latest discount information